Power Trunk / Liftgate Lock Actuator: Testing and Inspection
REAR GATE LATCH AND ACTUATOR ASSEMBLYINSPECTION
1. REAR GATE LATCH
Check if the rear gate latch operates normally.
- If latch deformation, abnormal wear, or unsmooth lock operation is observed, replace the rear gate latch & actuator assembly.
2. CHECK LOCK ACTUATOR
1. Disconnect the harness connector of rear gate latch and actuator assembly.
2. Connect the battery to the rear gate latch and actuator assembly terminals.
3. Replace the rear gate latch and actuator assembly if it is found defective.