Removal and Replacement

Sunroof Assembly







REMOVAL

CAUTION: Use great care not to damage the roof trim.

1. Disconnect the ground cable from battery.
2. Remove the roof trim.
3. Remove the sunroof lid.
4. Disconnect the sunroof motor connector.
5. Remove the bolts and then move the curtain airbag module.
6. Remove the bolts and then remove the frame bracket.







7. Remove the drain tube (A) from the sunroof frame.
8. Remove the nuts and bolts to remove the sunroof frame.







INSTALLATION

CAUTION: Be careful not to snag the harness.

Install each part in the reverse order of removal.

Tightening torque:
Refer to "COMPONENT" of "General Description". [Ref. to, COMPONENT, General Description.]

NOTE:
- Be sure to connect the harness connector.
- When installing the drain tube, insert it securely into drain pipe.

Length A: 15 mm (0.59 in) or more