Headlight and Tail Light System
HEADLIGHT AND TAIL LIGHT SYSTEMINSPECTION
1. LIGHTING SWITCH
Measure the resistance between lighting switch terminals. Refer to INSPECTION, Combination Switch (Light). Combination Switch (Light)
2. DIMMER & PASSING SWITCH
Measure the resistance between dimmer & passing switch terminals. Refer to INSPECTION, Combination Switch (Light). Combination Switch (Light)
3. HEADLIGHT RELAY
1. Connect terminal No. 4 to the battery positive terminal and the terminal No. 3 to the battery negative terminal, and check the resistance value between the headlight relay terminals.
2. Replace the headlight relay if the inspection result is not within the standard value.
4. TAIL AND ILLUMINATION RELAY
1. Connect terminal No. 4 to the battery positive terminal and terminal No. 3 to the battery ground terminal, and check the resistance between tail and illumination relay terminals.
2. If the result of the inspection is not at the standard value, replace the tail & illumination relay.