Global Positioning System Antenna: Service and Repair

GPS ANTENNA

REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the center panel.
3. Remove the navigation body. Service and Repair
4. Disconnect the connector (green) of GPS antenna.






NOTE: Attach a string of about 50 cm in length, etc. to the GPS antenna connector for easy installation work.

5. Remove the combination meter assembly.
6. Remove the screw and harness clamp to remove the GPS antenna.






NOTE: When the GPS antenna harness connector is pulled out, remove the string attached to the connector in step 4).

INSTALLATION
Install each part in the reverse order of removal.