Cowl Moulding / Trim: Service and Repair

Cowl Panel

Cowl Panel:

REMOVAL
1. Open the front hood.
2. Remove the wiper arm.
3. Detach the tabs and remove the cowl panel, side.







1. Detach tabs (A), (B), and (C) from the vehicle exterior.
2. Detach tabs (D) and (E).

4. Pull out and disconnect the washer hose.







5. Remove clips (A) and (B), and remove the cowl panel.







CAUTION:
- Press on the clip tabs from the left and right when removing clips (B).
- Do not pull forcibly on the clips to prevent damaging them.







6. Disconnect the washer hose.
7. Remove the washer nozzle.

INSTALLATION
Install each part in the reverse order of removal.

NOTE: Hook the claw of the cowl panel on the lower end of the windshield.