Remote Openers

REMOTE OPENERS

REMOVAL

1. FRONT HOOD OPENER
1. Remove the cable from the front hood lock.
2. Remove the bolt, and then detach the opener lever.






2. FUEL FILLER LID OPENER
1. Remove the rear seat.
2. Remove the lower inner trim, rear quarter trim and floor mat on the driver's side. Remove the clip holding the cable.
3. Remove the bolt and nut, and remove the opener pull handle (B).
4. Remove cable (A) from the opener pull handle (B).






5. Rotate the fuel lock inside the quarter panel to 90° and remove. (Either right or left turn)






INSTALLATION
Install each part in the reverse order of removal.

Tightening torque: Refer to "COMPONENT" of "General Description".

Tightening torque:
T1: 33 N.m (3.36 kgf.m, 24.2 ft.lb)
T2: 7.5 N.m (0.76 kgf.m, 5.5 ft.lb)