Overhaul

Sunroof Assembly

DISASSEMBLY

1. Remove the sunroof frame.
2. Remove the shade stopper (A).
3. Remove the motor bracket screw (B).
4. Remove the guide pipe screw (C), slightly pull out the guide pipe from the guide rail and then lower the motor bracket.







5. Pull out the sunshade (D) from sunroof frame.







ASSEMBLY
Assemble each part in the reverse order of disassembly.

INSPECTION

Check the moving load of the sunshade.
1. Attach a spring scale to sunshade edge using a cloth.







2. Pull the spring scale to measure moving load of the sunshade.

Moving load of sunshade:
20 N (2.04 kgf, 4.5 lb) or less

NOTE: Moving load is larger at the beginning of pulling a spring scale, so take a spring scale reading while sunshade sliding smoothly.

3. If it exceeds the specification, check the sunroof lid, sunshade, deflector and guide rail assembly for improper installation.