Power Seat System

Power Seat System

REMOVAL

CAUTION: When removing the front seat, disconnect the ground cable from the battery before disconnecting the side airbag module harness connector, and wait for 60 seconds before starting the operation.

1. POWER SEAT SWITCH
1. Detach the connectors and remove the seat side cover outside.
2. Remove the screws to remove the power seat switch assembly.







2. LUMBAR SWITCH
1. Detach the connectors and remove the seat side cover outside.
2. Disconnect the lumbar switch connector and remove the lumbar switch assembly.







INSTALLATION
Install each part in the reverse order of removal.