Clear Memory Mode

Clear Memory Mode

OPERATION

1) On the [[Main Menu]] display, select {Each System Check}.
2) On the [[System Selection Menu]], select {Brake Control System}.
3) Click the [OK] button after the {VDC} is displayed.
4) On the [[Brake Control Diagnosis]], select {Clear Memory}.
5) When the "Clear Memory?" is shown on the screen, click the [YES] button.
6) When "Done" and "Turn Ignition Switch OFF" are shown on the display screen, turn the ignition switch to OFF.

NOTE:
For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".