How to Use This Manuals

HOW TO USE THIS MANUALS

1. STRUCTURE
Each section consists of SCT that are broken down into SC that are divided into sections for each component. The specification, maintenance and other information for the components are included, and the diagnostic information has also been added where necessary.

2. CONTENTS
The first page has an index with tabs.

3. COMPONENT
Illustrations are provided for each component. The information necessary for repair work (tightening torque, grease up points, etc.) is described on these illustrations. Information is described using symbol. To order parts, refer to parts catalogue.






4. DEFINITIONS OF "NOTE", "CAUTION" AND "WARNING"

Note: Describes additional information to make works easier.

CAUTION: Describes prohibited matters to prevent vehicle or parts damage, or matters that requires special attention during work.

WARNING: Describes matters that may cause serious damage to the operator or other person, or that may cause damage or accident.

5. SPECIFICATION
If necessary, specifications are also included.

6. INSPECTION
Inspections to be carried out before and after maintenance are included.

7. MAINTENANCE
- Maintenance instructions for serviceable parts describe work area and detailed step with illustration. It also describes the use of special tool, tightening torque, caution for each procedure.
- If many serviceable parts are included in one service procedure, appropriate reference is provided for each parts.

Example:






8. DIAGNOSIS
Tables showing a step-by-step process make it easy to conduct diagnosis.

9. SI UNITS
Measurements in these manuals are according to the SI units. Metric and yard/pound measurements are also included.

Example:

Tightening torque: 44 N.m (4.5 kgf.m, 33 ft.lb)






The figure used in these manuals are described in the SI units and conventional units are described in ( ).

10. EXPLANATION OF TERMINOLOGY