Backup Lamp: Testing and Inspection
BACK-UP LIGHT SYSTEMINSPECTION
1. BACK-UP LIGHT SWITCH (MT MODEL)
1. Measure the resistance between back-up light switch terminals.
2. Replace the back-up light switch if the inspection result is not within the standard value.
2. INHIBITOR SWITCH (AT MODEL)
1. Measure the resistance between inhibitor switch terminals.
2. Replace the inhibitor switch if the inspection result is not within the standard value.
3. REFERENCE
For operation procedures of each component of the back-up light system, refer to the respective section.
- Rear combination light assembly: Rear Combination Light Assembly
- Back-up light bulb: Testing and Inspection