Airbag Connector

AIRBAG CONNECTOR

PROCEDURE

1. OCCUPANT DETECTION SYSTEM (BETWEEN AIRBAG REAR HARNESS AND SEAT HARNESS & BELT TENSION SENSOR)
1. How to disconnect:
Press the lock arm (A) to disconnect the connector.

CAUTION: When pulling the slide lock or disconnecting the connector, make sure to hold the connector rather than the harness.






2. How to connect:
Hold the connector and push in firmly until it clicks.

CAUTION: Make sure to insert the connector until the connector is locked. Pull lightly to confirm that it is fixed securely.

2. AIRBAG CONTROL MODULE
Refer to the airbag system section. Service and Repair

3. BUCKLE SWITCH RH
Refer to the airbag system section. Service and Repair