Horn Switch: Service and Repair
HORN SWITCHREMOVAL
WARNING: Always refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM" before handling the airbag module. Airbag System
NOTE: Horn switch is a unit with the driver's airbag module.
1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.
2. Remove the driver's airbag module.
INSTALLATION
Install each part in the reverse order of removal.
Tightening torque:
Driver's airbag module: 10 N.m (1.02 kgf.m, 7.4 ft.lb)