Camshaft Position Sensor: Service and Repair

Camshaft Position Sensor

REMOVAL

1. Disconnect the ground cable from battery.






2. Remove the air intake duct (Rear). (RH side only)
3. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.

- RH side






- LH side






INSTALLATION

Install in the reverse order of removal.

NOTE: Use new O-rings.

Tightening torque: 6.4 N.m (0.7 kgf.m, 4.7 ft.lb)