Read Diagnostic Trouble Code (DTC)

Read Diagnostic Trouble Code (DTC)

OPERATION

1. ECM
1. On {{Main Menu}} display, select {Each System Check}.
2. 2) On {{System Selection Menu}} display, select {Engine Control System}.
3. Select [OK] after the information of engine type is displayed.
4. On {{Engine Diagnosis}} display, select {Diagnostic Code(s) Display}.
5. On {{Diagnostic Code(s) Display}} display, select {Current DTC} or {Past DTC}.

NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). Immobilizer (Diagnostics)

2. BODY INTEGRATED UNIT
1. On {{Main Menu}} display, select {Each System Check}.
2. On {{System Selection Menu}} display, select {Integ. Unit}.
3. After {Integ. unit} is displayed, select [OK].
4. On {{Integ. unit mode failure diag.}} display, select {Diagnostic Code(s) Display}.

NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). Immobilizer (Diagnostics)