Check Security System Condition Memory

CHECK SECURITY SYSTEM CONDITION MEMORY

1. Pull out the key from the ignition switch, or turn the ignition to OFF.
2. Close all the doors, trunk lid and rear gate.
3. Open the front hood.
4. Press the LOCK button of the keyless transmitter.

NOTE: Wait until the security indicator light blinks twice within 0.5 seconds at 2 second intervals.
If the 30 second monitoring lag has been set, wait 30 seconds.

5. Disconnect the ground cable from the battery.
6. Connect the ground cable to the battery.
7. Check that the security indicator light blinks twice within 0.5 seconds at 2 second intervals. When it does not blink, replace the body integrated unit.