Operation CHARM: Car repair manuals for everyone.

Sunroof / Moonroof: Testing and Inspection

INSPECTION







- Failure turn of glass lid while driving rough road.
Glass lid has auto-reverse function. When specified or more force is applied to the glass lid, the lid turns back and stops. When operating the glass lid (open or close) while driving the rough road, the lid judges vibration as a force and may causes failure turns. When the failure turn is occurred, need to perform the initialize operation with following procedure.

1. INITIALIZE OPERATION

1. Tilt up the glass lid.
2. Release the switch once, and press the tilt up switch again for 15 seconds.
3. When the glass lid is raised a little and returned to tilt up position, release the switch for the moment. (Initialization of position detecting function)
4. Holding down the tilt up switch again within 5 seconds from releasing the switch will automatically perform tilt down/slide open/slide close. (When more than 5 seconds pass, the position detecting function is cancelled.)
5. Initialize operation is completed.