Clear Memory Mode

Clear Memory Mode

OPERATION

1) On [[Main Menu]] display, select {Each System Check}.
2) On [[System Selection Menu]] display, select {Brake Control System}.
3) Click the [OK] button after {VDC} is displayed.
4) On [[Brake Control Diagnosis]] display, select {Clearing Memory}.
5) When the "Clear Memory?" is shown on the screen, click the "YES" button.
6) When "Done" and "Turn off the ignition switch." are shown on the display screen, turn the ignition switch to OFF.

NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".