General Description

General Description

CAUTION

SUPPLEMENTAL RESTRAINT SYSTEM "AIRBAG"

Airbag system wiring harness is routed near the ABS wheel speed sensor and VDCCM&H/U.

CAUTION:
^ Do not use electrical test equipment on wiring harness and connector circuits of the airbag system.
^ Be careful not to damage the airbag system wiring harness when servicing the ABS wheel speed sensor and VDCCM&H/U.

INSPECTION

Before performing diagnosis, check the following items which might affect VDC problems.

BATTERY

Measure the battery voltage and check electrolyte.

Standard voltage:
12 V or more

Specific gravity:
1.260 or more

GROUND

Check the tightening torque of ground (GB-5) bolt of VDC.

Tightening torque:
13 Nm (1.3 kgf-m, 292.61 cm-lb)

BRAKE FLUID

1) Check the brake fluid level.
2) Check the brake fluid for leaks.

HYDRAULIC UNIT

Check the hydraulic unit.
^ When using the brake tester. Testing and Inspection
^ When not using the brake tester. Testing and Inspection

BRAKE DRAG

Check for brake drag.

BRAKE PAD AND ROTOR

Check the brake pad and rotor.
^ Front
^ Rear

TIRES

Check the tire specifications.