Procedures

Differential Gear Oil

INSPECTION

1) Disconnect the ground cable from battery.
2) Lift up the vehicle.
3) Disconnect the oil temperature switch connector. (T-type (H3))





4) Remove the filler plug or the oil temperature switch, and then check the gear oil. Replace the gear oil if it is contaminated, deteriorated or cloudy.

NOTE:
Remove the oil temperature switch and adapter as a unit.

5) Check that the gear oil level is within -5 mm (-0.2 in) from the bottom of the filler plug hole or of the oil temperature switch hole. If the level is low, confirm that there is no oil leakage and refill up to the bottom of filler plug hole or the oil temperature switch hole.

^ T-type (B2)





^ T-type (H3)