Overhaul
Oil Flow Control Solenoid ValveDISASSEMBLY
1. INTAKE SIDE
1. Remove the two mounting bolts securing oil return cover, and remove the oil return cover and gasket.
2. Remove the bolt securing oil flow control solenoid valve, and remove the oil flow control solenoid valve.
2. EXHAUST SIDE
The oil flow control solenoid valve on exhaust side cannot be disassembled.
ASSEMBLY
1. INTAKE SIDE
1. Install the oil flow control solenoid valve.
Tightening torque: 6.4 N.m (0.7 kgf.m, 4.7 ft.lb)
2. Apply liquid gasket to the two bolts securing oil return cover.
Liquid gasket: THREE BOND 1324 (Part No. 004403042) or equivalent
3. Attach the oil return cover and gasket.
NOTE: Use a new gasket.
Tightening torque: 9 N.m (0.9 kgf.m, 6.6 ft.lb)
2. EXHAUST SIDE
The oil flow control solenoid valve on exhaust side cannot be disassembled.