Overhaul

Intake Duct

DISASSEMBLY

1. Remove the vacuum hose (A) and vacuum hose (B) from intake duct.






2. Remove the wastegate control solenoid valve and air control hose from the intake duct.






ASSEMBLY

1. Install the wastegate control solenoid valve and air control hose to the intake duct.
- Use new O-rings.
- When tightening the boost control solenoid valve, check that it is securely seated.

Tightening torque: 4 N.m (0.4 kgf.m, 3.0 ft.lb)






2. Install the vacuum hose (A) and vacuum hose (B) from intake duct.