Camshaft Position Sensor: Service and Repair

Camshaft Position Sensor

REMOVAL

1. INTAKE SIDE
- Camshaft position sensor RH
1. Disconnect the ground cable from battery.






2. Disconnect the connector from the camshaft position sensor RH, and remove the camshaft position sensor RH.






- Camshaft position sensor LH
1. Disconnect the ground cable from battery.






2. Remove the intake manifold.
3. Remove the camshaft position sensor LH.






2. EXHAUST SIDE

1. Disconnect the ground cable from battery.






2. Lift up the vehicle.
3. Remove the under cover.
4. Disconnect the connector from the camshaft position sensor, and remove the camshaft position sensor.
- RH side






- LH side






INSTALLATION

1. INTAKE SIDE

Install in the reverse order of removal.

Tightening torque: 6.4 N.m (0.7 kgf.m, 4.7 ft.lb)

2. EXHAUST SIDE

Install in the reverse order of removal.

Tightening torque: 6.4 N.m (0.7 kgf.m, 4.7 ft.lb)