Spark Plug: Service and Repair
Spark PlugREMOVAL
Spark plug: Refer to "SPECIFICATION" for the spark plug.
1. RH SIDE
1. Disconnect the ground cable from battery.
2. Remove the air cleaner case.
3. Disconnect the connector from ignition coil.
4. Remove the ignition coil.
NOTE: Turn #3 ignition coil by 180 degrees to remove it.
5. Remove the spark plug with a spark plug socket.
2. LH SIDE
1. Remove the battery.
2. Disconnect the connector from ignition coil.
3. Remove the ignition coil.
NOTE: Turn #4 ignition coil by 180 degrees to remove it.
4. Remove the spark plug with a spark plug socket.
INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
Tightening torque (Spark plug): 21 N.m (2.1 kgf.m, 15.5 ft.lb)
Tightening torque (Ignition coil): 16 N.m (1.6 kgf.m, 11.8 ft.lb)
2. LH SIDE
Install in the reverse order of removal.
Tightening torque (Spark plug): 21 N.m (2.1 kgf.m, 15.5 ft.lb)
Tightening torque (Ignition coil): 16 N.m (1.6 kgf.m, 11.8 ft.lb)