Fuel Tank Pressure Sensor: Service and Repair

Fuel Tank Pressure Sensor

REMOVAL

WARNING: Place "NO OPEN FLAMES" signs near the working area.

1. Disconnect the ground cable from battery.






2. Open the fuel filler lid and remove the fuel filler cap.
3. Lift up the vehicle.
4. Disconnect connector (A) from fuel tank pressure sensor.
5. Pull out the vacuum hose (B) from vehicle.
6. Remove the fuel tank pressure sensor from the bracket.






7. Disconnect the pressure hose from fuel tank pressure sensor and remove the fuel tank pressure sensor.






INSTALLATION

Install in the reverse order of removal.

Tightening torque: 7.35 N.m (0.7 kgf.m, 5.4 ft.lb)