Rear Door: Adjustments

ADJUSTMENT

Adjust the clearance around the rear door panel as follows.







1. Adjust the vertical and horizontal positions of rear door panel.







1. Loosen the body side bolts of upper and lower hinges.
2. Adjust the vertical and horizontal clearance of rear door panel.

2. Adjust the surface level gap between rear door panel and body.

CAUTION: Do not use an impact wrench. Welding area on the striker nut plate is easily broken.







1. Loosen the screws (A).
2. Tap the striker (B) using a plastic hammer to adjust the surface level gap between rear end of rear door panel and rear quarter.