Trunk Lid Latch and Actuator Assembly
Trunk Lid Latch and Actuator AssemblyREMOVAL
1. Disconnect the ground cable from battery.
2. Remove the trunk lid trim.
3. Remove the trunk lid latch and actuator assembly.
1. Disconnect the harness connector.
2. Remove the bolts, and remove the trunk lid latch&actuator assembly.
INSTALLATION
Install each part in the reverse order of removal.
Tightening torque:
T1: 7.5 N.m (0.76 kgf.m, 5.5 ft.lb)
T2: 25 N.m (2.55 kgf.m, 18.4 ft.lb)
T3: 28 N.m (2.86 kgf.m, 20.7 ft.lb)