Trunk Lid Latch and Actuator Assembly
Trunk Lid Latch and Actuator AssemblyINSPECTION
1. TRUNK LID LATCH
Check if the trunk lid latch operates normally.
If latch deformation, abnormal wear, or unsmooth lock operation is observed, replace the rear gate latch & actuator assembly.
2. LOCK ACTUATOR
1. Disconnect the trunk lid latch & actuator assembly connector.
2. Check the door lock operation by applying battery voltage between the terminals of trunk lid latch & actuator.
Preparation tool: Circuit tester
3. If the actuator does not operate normally, replace the trunk lid latch & actuator assembly.