Overhaul

Combination Meter

DISASSEMBLY

DISASSEMBLY OF COMBINATION METER ASSEMBLY

CAUTION:
- Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
- Be careful not to apply excessive force to the trip knob.
- Be sure not to touch the meter indicator needle.
Disengage the claw, and remove the meter glass (A) and meter visor (B) from the meter case assembly (C).

BULB REPLACEMENT
LEDs are used for all of warning lights and indicator lights of
combination meters, replace the meter case assembly if faulty.

ASSEMBLY
Assemble each part in the reverse order of disassembly.