Turn Signal Light and Hazard Light System

Turn Signal Light and Hazard Light System

INSPECTION

1. CHECK TURN SIGNAL SWITCH
Measure the resistance between turn signal switch terminals. Testing and Inspection

2. CHECK HAZARD SWITCH

1. Remove the A/C control panel.
- Manual A/C model:
- Auto A/C model:

2. Measure the resistance between hazard switch terminals.
Preparation tool: Circuit tester

- AUTO A/C MODEL






- MANUAL A/C MODEL






3. Replace the A/C control panel if the inspection result is not within the standard value.

3. CHECK TURN SIGNAL AND HAZARD MODULE

1. Measure the voltage between turn signal & hazard module connector and chassis ground.
Preparation tool: Circuit tester

Connector






2. Replace the turn signal and hazard module if the inspection result is not within the standard value.