Timing Belt Cover
Timing Belt CoverREMOVAL
1) Remove the crank pulley.
2) Remove the stopper rod.
3) Remove the timing belt cover LH (A).
4) Remove the front timing belt cover (B).
INSTALLATION
1) Install the front timing belt cover (B).
Tightening torque:
5 Nm (0.5 kgf-m, 3.7 ft-lb)
2) Install the timing belt cover LH (A).
Tightening torque:
5 Nm (0.5 kgf-m, 3.7 ft-lb)
3) Install the stopper rod.
Tightening torque:
36 Nm (3.7 kgf-m, 26.6 ft-lb)
4) Install the crank pulley.
INSPECTION
Check the timing belt cover for damage.