Fuel Pump Control Unit: Service and Repair

Fuel Pump Control Unit

REMOVAL

1. Disconnect the ground cable from battery.
2. Remove the trunk trim panel assembly-side RH. (Sedan model)
3. Remove the right side rear quarter trim. (OUTBACK model)
4. Remove the fuel pump control unit.
- Sedan model






- OUTBACK model






5. Disconnect the connector from fuel pump control unit.
- Sedan model






- OUTBACK model






INSTALLATION

Install in the reverse order of removal.

Tightening torque: 5 N.m (0.5 kgf.m, 3.7 ft.lb)