Antitheft Motion Sensor: Description and Operation

Impact Sensor

OPERATION

IMPACT SENSOR SETTING USING SUBARU SELECT MONITOR

1. Connect the Subaru Select Monitor to the data link connector.
2. Turn the ignition switch to ON.
3. On the "System Selection Menu", select {Integ. unit mode}.
4. Select {ECM customizing}.
5. Make a impact monitor setting.
- When installing: ON
- When removing: OFF

6. Make a impact monitor ON/OFF setting.
- When installing: ON
- When removing: OFF

7. Turn the ignition switch to OFF, and then remove the Subaru Select Monitor.