Rear Combination Light Assembly
Rear Combination Light AssemblyINSPECTION
1. 4 DOOR MODEL
1. Visually check the bulb for blow out.
2. Check the bulb specification.
3. Replace the bulb if it is found defective.
2. DOOR MODEL
1. Install the rear combination light assembly and check that it blinks normally.
2. If it fails to blink normally, replace the rear combination light assembly with a new part.
NOTE: Since LED (Light Emitting Diode) is used for the tail light/stop light bulb, replace the rear combination light assembly if the LED burns out.