Turn Signal Light and Hazard Light System
Turn Signal Light and Hazard Light SystemINSPECTION
1. TURN SIGNAL SWITCH
Measure the resistance between turn signal switch terminals. Testing and Inspection
2. HAZARD SWITCH
1. Measure the resistance between hazard switch terminals.
2. Replace the hazard switch if it is found defective.
3. TURN SIGNAL AND HAZARD MODULE
1. Connect the battery and turn signal light bulb to the module. The module is properly functioning if it blinks when power is supplied to the circuit.
2. Replace the turn signal & hazard module if it is found defective.