Clear Memory Mode
CLEAR MEMORY MODEOPERATION
1. ECM
1. On [Main Menu] display, select {Each System Check}.
2. On [System Selection Menu] display, select {Engine Control System}.
3. After engine type information is displayed, select [OK].
4. On [Engine Diagnosis] display, select {Clearing Memory}.
5. When "Done" is displayed on the display, end the Subaru Select Monitor and turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
2. BODY INTEGRATED UNIT
1. On the [Main Menu], select {Each System Check}.
2. On the [System Selection Menu], select {Integ. Unit}.
3. After {Integ. Unit} is displayed, select [OK].
4. On the [Integ. unit mode], select {Clear Memory}.
5. When "Done" is displayed on the display screen, end the Subaru Select Monitor and turn the ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".