Fuel Tank Pressure Sensor: Service and Repair

FUEL TANK PRESSURE SENSOR

REMOVAL

WARNING: Place "NO OPEN FLAMES" signs near the working area.

1. Disconnect the ground cable from battery.






2. Open the fuel filler lid and remove the fuel filler cap.
3. Lift up the vehicle.
4. Disconnect the connector (A) and the pressure hose (B) from the fuel tank pressure sensor and remove the fuel tank pressure sensor together with the bracket.






5. Remove the vacuum hose (A) from the fuel tank pressure sensor, and remove the fuel tank pressure sensor from the bracket.






INSTALLATION

Install in the reverse order of removal.

Tightening torque: 7.35 N.m (0.7 kgf-m, 5.4 ft-lb)