Camshaft Position Sensor: Service and Repair

CAMSHAFT POSITION SENSOR

REMOVAL

1. CAMSHAFT POSITION SENSOR RH
1. Remove the collector cover.
2. Disconnect the ground cable from battery.






3. Disconnect the connector (A) from the camshaft position sensor RH, and remove the camshaft position sensor RH from the rear side of the cylinder head.






2. CAMSHAFT POSITION SENSOR LH
1. Remove the collector cover.
2. Disconnect the ground cable from battery.






3. Remove the intake manifold.
4. Remove the camshaft position sensor LH.






INSTALLATION

Install in the reverse order of removal.

Tightening torque: 6.4 N.m (0.7 kgf-m, 4.7 ft-lb)