Removal and Replacement
GENERATORTURBO MODEL
1. Remove the collector cover.
2. Disconnect the ground cable from battery.
3. Remove the collector cover bracket.
4. Disconnect connector (A) and terminal (B) from generator.
5. Remove the front side belts.
6. Remove the generator from the bracket.
INSTALLATION
TURBO MODEL
CAUTION: Check and adjust the front side belt tension.
1. Install the generator to the bracket.
Tightening torque:
T1: 22 N.m (2.2 kgf-m, 16.2 ft-lb)
T2: 25 N.m (2.5 kgf-m, 18.4 ft-lb)
2. Install the front side belt.
3. Connect the connector (A) and terminal (B) to the generator.
Tightening torque: 16 N.m (1.6 kgf-m, 11.8 ft-lb)
4. Install the collector cover bracket.
Tightening torque:
T1: 8.5 N.m (0.9 kgf-m, 6.3 ft-lb)
T2: 25 N.m (2.5 kgf-m, 18.4 ft-lb)
5. Connect the battery ground terminal.
6. Install the collector cover.