Removal

Select Lever

REMOVAL

1) Shift the select lever to "N" range.
2) Disconnect the ground cable from battery.
3) Lift up the vehicle.
4) Remove the rear exhaust pipe. (non-turbo model)
5) Remove the center exhaust pipe (rear). (turbo model)
6) Remove the heat shield cover.





7) Disconnect the cable from the arm COMPL.





8) Raise the claw of clamp to remove the select cable.





9) Lower the vehicle.
10) Remove the grip.
11) Remove the parking brake lever boot.
12) Remove the console box.
13) Remove the console side panel and console front panel.
14) Remove the indicator assembly.





15) Remove the harness clips from the bracket.
16) Remove the blind.





17) Disconnect the connectors, remove the four bolts and take out the select lever COMPL from vehicle body.