Antitheft Motion Sensor: Description and Operation

Impact Sensor

OPERATION

IMPACT SENSOR SETTING USING SUBARU SELECT MONITOR
1. Prepare the Subaru Select Monitor kit.
2. Turn the ignition switch to ON (engine OFF) and run the "PC application for Subaru Select Monitor".
3. On [[System Selection Menu]] display, select {Integ. unit mode}.
4. Select {Unit customizing} from {Work Support}.
5. Make a impact monitor setting.
- When installing: ON
- When removing: OFF

6. Make a impact monitor ON/OFF setting.
- When installing: ON
- When removing: OFF

7. Turn the ignition switch to OFF, and then remove the Subaru Select Monitor.