Function Check

Function Check

OPERATION

NOTE: In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.

1. On [[Main Menu]] display, select {Each System Check}.
2. On [[System Selection Menu]] display, select {In-teg. unit mode}.
3. On [[Integ. unit mode failure diag.]] display, select {Work Support}.
4. On [[Work Support]] display, select {Active Test}.
5. Select an item to be operated on [[Active Test]] display, and press the [OK] button.
6. Pressing [Next] starts, [End] cancels the operation and [OK] returns to the System Operation Check Mode display screen.

NOTE:
- If not equipped (based on area or condition), process will not go on.
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".