Rear Door: Adjustments

ADJUSTMENT

Adjust the clearance around the panel assembly - rear door as follows.







1. Adjust the vertical and horizontal positions of the panel assembly - rear door.







1. Loosen the body side bolts of the upper hinge - rear door and the lower hinge - rear door
2. Adjust the vertical and horizontal clearance of the panel assembly - rear door.

2. Adjust the surface level gap between the panel assembly - rear door and the body.

CAUTION: Do not use an impact wrench. Welding area on the striker nut plate is easily broken.







1. Loosen the screws (A).
2. Tap the striker - rear door (B) using a plastic hammer to adjust the surface level gap between the rear end of the panel assembly - rear door and the rear quarter.