Rear Gate

ADJUSTMENT

Adjust the clearance around the panel - rear gate as follows.







1. Adjust the vertical and horizontal positions of the panel - rear gate.







1. Loosen the mounting bolts of the hinge - rear gate.
2. Adjust the vertical and horizontal clearance of the panel - rear gate.

Tightening torque:
25 N.m (2.55 kgf-m, 18.4 ft-lb)

2. Adjust the surface level gap between the panel - rear gate and the body.







1. Remove the trim panel - rear skirt.
2. Loosen the bolt.
3. Tap the striker - rear gate using a plastic hammer to adjust the surface level gap between the panel -rear gate and the body.

Tightening torque:
25 N.m (2.55 kgf-m, 18.4 ft-lb)