Remote Openers

Remote Openers

REMOVAL

1. FRONT HOOD OPENER
1. Remove the opener handle.
1. Remove the cable.
2. Remove the bolt, and remove the opener handle.






2. Remove the following parts and remove the cable clip and cable.
- Lock assembly - front hood:
- Cover assembly - instrument panel LWR driver:






2. TRUNK LID OPENER
1. Remove the cover - handle.
1. Open the cover by using a flat tip screwdriver.
2. Remove the screws and detach the cover - handle.






2. Remove the pull handle - opener.
1. Remove the nut.
2. Remove the cable from pull handle - opener.






3. Remove the trim panel - trunk side RH.
4. Remove the lower inner trim.
5. Remove the trim panel - trunk lid.
6. Disconnect the cable from the lock assembly - trunk lid.






7. Remove the cable clip, and remove the cable.






3. FUEL FLAP OPENER
1. Remove the cover - handle.
1. Open the cover by using a flat tip screwdriver.
2. Remove the screws and detach the cover - handle.










2. Remove the pull handle - opener.
1. Remove the nut.
2. Remove the cable from pull handle - opener.






3. Remove the trim panel - trunk side RH. (4 door model)
4. Remove the trim panel - rear apron RH. (5 door model)
5. Remove the fuel lock inside the quarter panel.
1. Press the claws of the fuel lock.
2. While keeping the condition in step (1), pull the fuel lock to the rearward of the vehicle.






6. Remove the lower inner trim.
7. Remove the cable clip, and remove the cable.










INSTALLATION

1. Before installation, check the following items.
- Cable is free from deformation such as fray.

2. Install each part in the reverse order of removal.

Tightening torque:
Front hood lock:
T1: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
T2: 33 N.m (3.36 kgf-m, 24.3 ft-lb)

Remote opener:
T: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)