Trunk / Liftgate Latch: Testing and Inspection

Trunk Lid Latch and Actuator Assembly

INSPECTION

1. LATCH
Check if the latch operates normally.
If latch deformation, abnormal wear, or unsmooth lock operation is observed, replace the lock assembly trunk lid.

2. ACTUATOR

UNIT INSPECTION

PREPARATION TOOL: Circuit tester

1. Check door lock operation
Check the door lock operation when battery voltage is applied between the terminals of actuator.






2. CHECK SWITCH.
Check the resistance between actuator terminals.






3. If it does not operate normally, replace the lock assembly - trunk lid.