Scalp Cap

Scalp Cap







REPLACEMENT

CAUTION:
- When removing the mirror - repair, be careful not to damage the back surface of mirror - repair with a flat tip screwdriver.
- When installing the mirror - repair, insert the connector and clip securely.

1. Operate the remote control mirror switch to face the mirror - repair upward.
2. Disconnect the ground cable from battery.
3. Remove the mirror - repair.
1. Using a flat tip screwdriver, release the clip, and slide the mirror - repair downward to remove.







2. Disconnect the mirror heater connector. (Model with mirror heater)







4. Release the claws, and then remove the cover - cap outer mirror lower.







5. Release the claws, and then remove the cover - cap outer mirror.

CAUTION: Be careful not to apply excessive force when removing the cover - cap outer mirror, as the lower hooks may become damaged.







6. Engage the claws into the hole and install the cover - cap outer mirror.







7. Engage the claws into the hole and install the cover - cap outer mirror lower.







8. Check that all the claws are securely engaged.
9. Install the mirror - repair in the reverse order of removal.

CAUTION: Be sure to insert the connector and clips securely.