Overhaul

Combination Meter

DISASSEMBLY

1. DISASSEMBLY OF COMBINATION METER ASSEMBLY

CAUTION:
- Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
- Be careful not to apply excessive force to the trip knob.
- Be sure not to touch the meter indicator needle.

Release the claw, and remove the glass - combination meter (A) and visor - combination meter (B) from the meter - main assembly (C).






2. BULB REPLACEMENT
Because LEDs are used for all of warning lights and indicator lights of combination meters, replace the meter - main assembly if faulty.

ASSEMBLY

Assemble each part in the reverse order of disassembly.