Tail/Stop Light Bulb
Tail/Stop Light BulbREMOVAL
1. 4 DOOR MODEL
1. Disconnect the ground cable from battery.
2. Remove the mat - trunk.
3. Remove the trim panel - trunk rear.
1. Remove the clip.
2. Release the claws, and remove the trim panel - trunk rear.
4. Remove the clips, and turn over the trim panel - trunk side.
5. Remove the bulb socket and tail light/stop light bulb.
2. 5 DOOR MODEL
1. Disconnect the ground cable from battery.
2. Remove the light assembly - rear combination.
CAUTION: Be careful not to damage the clips.
1. Release the bolts and clips, then pull out the light assembly - rear combination to the vehicle rear.
2. Disconnect the connector and remove the light assembly - rear combination.
3. Remove the bulb socket and tail light/stop light bulb.
INSTALLATION
Install each part in the reverse order of removal.
Tightening torque:
Light assembly - rear combination (5 door model): 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)