Wiper Switch: Service and Repair

Combination Switch (Wiper)

REMOVAL

1. Disconnect the ground cable from battery.
2. Remove the cover assembly - column.
1. Remove the screws by turning the steering wheel to right and left.






2. Release the claw, and remove the cover assembly - column UPR and the cover assembly - column LWR.






3. Remove the switch assembly - combination wiper select.
1. Disconnect the connector.
2. Release the claws, and pull out the switch assembly - combination wiper select.


CAUTION: Do not press the claws with excessive force. They may be damaged.







INSTALLATION

Install each part in the reverse order of removal.